SUN-FIX Epoxy Adhesive, QUICK

● For instant (pot life 3 minutes) repair of cracks, holes and leakages on both dry and damp / wet surfaces such as;           
   - Pipes and elbows,            
   - Fittings and flanges,            
   - Copper gutters and sheets,            
   - Water heaters and tanks,            
   - Hot and cold water piping,          
   - Refrigerating and air conditioning equipment      
● Can be used as a repair compound for the installation and maintenance sector.       
● The cured material can be mechanically machined (e.g.drilled, filed, milled) and overpainted without  pretreatment.    
● Resists fuels, oil, ester, salt water as well as most dilute acids    
● High bondage with: metals, aluminum, cast iron, stainless steel,    
● Moderate bondage with:  hard plastics, rigid PVC, glass, ceramics, natural stone, marble, brick, concrete, fibre reinforced materials (GFRP, CFRP, fibreglass), wood, timber products (plywood, MDF)    
● Not suitable for use with rubers and elastomers    
● When properly handled and completely cured, is toxicologically harmless.    
● To ensure perfect bond, the surfaces to be joined must be clean, smooth surfaces shall be roughened by sandblasting.    
● Covers gaps of maximum 15mm per procedure    
    
Technical Features Non-Cured Conditions    
● Pot Life: 3 min    
● Color after curing: copper    
● Gap covering power: 15 mm    
● Cure time for handling strength (35% strength): 10 min    
● Cure time for bearing mechanical loads (50% strength): 60 min    
● Cure time for final strength (100% strength): 24 hours    
    
Technical Features Fully-Cured Conditions    
● Compressive Strength: 80N/mm²     
● Tensile Shear Strength: 4,8N/mm²     
● Temperature resistance, long-term:-50 ºC to +120 ºC        
● Temperature resistance, short-term: 150ºC        
● Electrical resistance: 5x10˄11Ω/cm    
● Dielectric Strength: 3,0kV/mm    
● Shelf life at room temperature: 18 months      
● Packing: 50g